Dependable
power
1. The 1506A-E88TAG2
delivers greater productivity through an improved power to weight ratio.
2. The world-class power
density has been achieved from an 8.8 litre turbocharged engine using a
hydraulic actuated unit injection (HEUI) fuel system; making this engine robust
for all markets due to its ability to cope with the variation of fuel quality
around the world
3. In its class, the
1506A-E88TAG2 has been designed to provide dependable power even in extreme
ambient climates.
Low
operating costs
1. Oil change service
intervals are set at 500 hours as standard.
2. Designed to provide
low cost of ownerhsip, simple maintenance and reduced downtime.
3. 12 months unlimited
warranty with 24 months on Major items. For low use applications <500 hours
per year warranty is extended by a further 12 months. See Perkins Warranty
Policy for further details.
Flexibility
1. The 1506-E88TAG2 has
been designed to hit the power node requirements of customers.
2. Switchability
functionality from 50 Hz/1500 rpm to 60 Hz/1800 rpm and vice versa is available
to provide greater flexibility for frequency selection.
World
class product support
1. Experienced global
network of distributors and dealers, fully trained engine experts deliver total
service support around the clock, 365 days a year. They have a comprehensive suite
of web based tools at their disposal, covering technical information, parts
identification and ordering systems, all dedicated to maximising the
productivity of your engine.
2. Perkins actively
pursues product support excellence by insisting our distribution network invest
in their territory to provide customers with a consistent quality of support
across the globe
3. Throughout the entire
life of a Perkins engine, we provide access to genuine OE specification parts
giving 100% reassurance that you receive the very best in terms of quality for
lowest possible cost, wherever your Perkins powered machine is operating in the
world.
Perkins
1506A-E88TAG2 Generator Engine
Technical
information
Air inlet system -
Mounted air filter and turbocharger
Fuel
system
1. HEUI fuel system with
full authority electronic control
2. Electronic governing
to ISO 8528-5 with stand-alone isochronous and load-sharing capabilities
3. Fuel filter, fuel
transfer pump, fuel priming pump
4. Spin on primary,
secondary and water filter separator
Lubrication
system
1. Wet full aluminium
sump with filler and dipstick
2. Full-flow spin-on filters
3. Oil pump, gear driven
Cooling
system
1. Thermostatically
controlled with belt driven, circulating pump and belt-drive fan
2. Mounted belt driven
pusher fan
3. Radiator supplied
loose with all guards and pipes
4. Air-to-air charge
cooler incorporated in radiator
Electrical
equipment
1. 24V starter motor and
24V, 45 amp alternator with DC output
2. Electronic Control
Module (ECM) mounted on engine with wiring looms and sensors
Flywheel
and housing
1. High inertia flywheel
to SAE 1 J620 Size 355.6 mm (14 in)
2. Aluminium SAE 1
flywheel housing
Mountings - Front engine
mounting bracket
Perkins
Diesel Generator Maintenance
1. Perkins diesel generator needs to change oil, clean diesel filter and air filters after 60
hours of operation.
2. The electrolyte of
the battery should be checked frequently and replenished in case of shortage.
3. Should always check
the tightness of the belt, adjust the tensioning mechanism to maintain the
tensioning state.
4. In the cold season,
the water heating and oil heating switches should be turned on to keep the
genset at a certain temperature to ensure the normal use of the diesel
generator set.
Comments
Post a Comment