Skip to main content

How to Maintain Diesel Generator Lubricating System?


Introduction of lubricating oil

The main function of lubricating oil is to reduce friction and wear by providing a long-lasting protective oil film between the moving parts of the diesel engine. It also prevents corrosion on the surface of each component. High temperature cylinders and bearings are highly dependent on the oil film. Lubricating oil also has a very important cooling effect on many components of the genset.

For diesel engine oil, please use the various types of specifications described in the table below. For details, refer to the random information of the diesel engine. (SAE is the American Society of Automotive Engineers temperature/viscosity index, such as 15W/40, etc.: API represents American Petroleum Institute lubricant quality system)



Attentions to lubricating oil

a. Do not start or operate the diesel engine when the lubricating oil filling is opened to prevent the lubricating oil from spraying out.

b. The use of lubricating oil that does not meet the above specifications will result in operational loss and poor reliability.

c. If the diesel engine uses the wrong type or quality grade lubricant, the warranty service will be invalid, should avoid different specifications, different brands of lubricating oil mixed use.

Replace lubricating oil and oil filter

I. Hot lubricating oil is easy to cause scald. Please avoid the contact between hot oil and skin. Add lubricant to ensure that the lubricating oil is between the lowest and highest oil level mark. Be sure to follow the recommended lubricant replacement period. When replacing lubricating oil, be sure to replace oil filter at the same time.

II. Replacement steps

a. Remove the bottom screw plug, drain the lubricating oil, install the bottom screw plug, and remove the filter;
b. Clean the filter mounting seat to avoid dirt entering the engine when installing new filter;
c. Stop the engine after running to the operating temperature;
d. Fill the new filter with lubricating oil, apply some oil to the gasket, and screw the filter to the engine by hand until the gasket touches the base, and then tighten it;
e. Add the lubricant to the appropriate level;
f. Start the generator set, check whether the lubricant pressure is normal, check for leakage around the filter.
标签：

Comments

Post a Comment

Popular posts from this blog

Diesel Generator Power Ratings: Standby vs Prime vs Continuous

Diesel generator sets are commonly used in a variety of sectors due to their dependable performance and high efficiency. They can be used for emergency power supply in the event of a power cut or used in places without connection to a power grid. When selecting a diesel generator for your home or business, you need to consider many factors, such as generator’s ratings. In this article, we’ll explain the three basic rating types - standby, prime, and continuous in diesel generators. ISO-8528-1:2018 defines basic generator set rating categories based on four operational categories: Emergency Standby Power (ESP), Prime Power (PRP), Continuous Power (COP) and Limited-Time Running Prime (LTP). Read on and learn the application of power ratings for engines used in generating sets. Standby Power Rating Standby Power(ESP) is used to supply emergency power when the external power supply is interrupted, such as power outages. Standby power rated generators can supply reliable electricity as t...
Post a Comment
Read more

Main Structural Features of Natural Gas Engine - Weichai WP13NG Gas Generator

1.1 Main structural features of natural gas engine ● A cover per cylinder, dependable operation, easy disassembly. ● Frame-type main bearing structure and high complete machine rigidity which benefits the reliability and  service life of complete machine. ● Electronic throttle is adopted to control engine revolving speed. ● Mixture supply system uses mixer to regulate air-fuel ratio and adopts proportional mix and supercharged inter-cooling method to stabilize gas supply. ● Water-cooling middle case turbocharger applicable to gas engine features is selected and circulating  water shall be used to cool down turbocharger lubrication cooling oil so as to effectively prevent  pressure bearing lubricating oil from coking and to improve turbocharger’s reliability. ● Designed gas mixing system satisfies gas fuel features to effectively support stable lean burn and enhance thermal efficiency. ● Two pairs of friction couples of inlet, outl...
Post a Comment
Read more

What Should You Pay Attention to in Routine Maintenance of Diesel Generator Sets

In modern society, the stability of power supply is directly related to the operation efficiency of enterprises and people's quality of life. Diesel generators have become an indispensable backup power supply or main power source in various industries due to their high efficiency, durability and reliability. However, to ensure the smooth operation and optimal performance of the generator sets, regular maintenance is essential. Here is what you need to pay attention to in the routine maintenance of diesel generators. Keep your generator clean It’s important to keep the generator’s exterior and the generator room clean. Regularly remove any dirt, dust, or debris that may accumulate to on the generator’s surface. This is not only for the sake of beauty, but also for the smooth operation of the unit. Cleaning the generator’s exterior, air intake vents, exhaust outlets and generator room can effectively reduce the risk of generator overheating. In addition, check if the connection bol...
Post a Comment
Read more