Skip to main content

Shangchai G Series Engine Operation Instructions

This article mainly talks about Shangchai G Series V-type SC27G diesel engine operation instructions.




1.3 Safety Instructions (To user and operator)

Do not wear a loose garment or any jewelry when working around the engine or its driven equipment. If necessary, wear safety goggles, work clothes, safety helmet or other protective items.

All the exposed rotating parts should be provided with guards with firm installation to prevent personal injury.

The workroom of the engine should be well ventilated with waste gas exhausted outside.

No flammable liquid is allowed to be around the engine.

Take all tools, wires, other odds and ends away from the engine prior to starting.

Make sure to shutdown the engine before any adjustment is performed to it and its driven equipment.

Smoking is not allowed during fuel filling, otherwise, fuel steam can cause fire easily.

Smoking is also not allowed when checking the electrolyte level because electrolyte will release flammable gas.

Contact between electrolyte and skin or eyes must be prevented when replenishing rt for the battery, because electrolyte is an acid. In case of skin contact, please flush the contacted part with soap and clean water; in case of eyes contact, flush your eye(s) for 15 minutes with clean water and seek for medical treatment immediately.

Cool the engine first when filling coolant to avoid being hurt by coolant steam. Open the pressure cap only when the coolant temperature is lower than 50 C, and then slowly loosen the cap to release the pressure of coolant.

Wipe up lubricating oil, fuel, coolant or other liquids overflowed. Put oily rags into a fire-protection container, and do not leave Ft on the engine.

Before starting the engine after being repaired, make sure to be ready to cut air supply. In case of any abnormal, cut air supply to stop the engine immediately.

Do not rotate the engine with the fan, otherwise severe personal injury or damage to fan blades can be caused.

Do not touch by hand the intake and exhaust system components such as the exhaust manifold, turbocharger, inter cooler air inlet pipe, expand tank because they are in high temperature when the engine is in operation,

Release the pressure in the air system, lubricating system, cooling system or fuel system prior to dismantling or loosening any pipelines, permanent joints, connectors or relevant parts of these system. Do not use your hand to check leakage, otherwise high pressure and high temperature fuel, lubricating oil and coolant can cause personal injury.

If the engine will not be used for a long time or is under repair, separate it from the battery to prevent an unexpected start-up. Meanwhile, place a sign STOP in the operation room or on the controller.

Used engine oil may contain carcinogenic substance which can result in reproductive toxicity, therefore, inhalation of or longtime exposure to oil steam should be avoided. Waste oil should be disposed in proper, safe and reliable manner.



1.4 Engine Operation Instructions



Read this manual carefully, and be in strict accordance with operation instructions and maintenance procedure specified in this manual.

Conduct daily and 4-level maintenance as specified in this manual, and keep the records of scheduled maintenance.

Use the proper fuel, lubricating oil and coolant specified in this manual.

Do not run the engine without air filter, otherwise, early engine wear will happen.

The coolant specified in the manual should be adopted for the engine cooling system in any kind of climate.

When filling lubricating oil, it is not allowed to use the mixture of oil of different specifications.

Preparations should be well done before starting the engine. Be sure to remember that the engine must be started without load.

Check if coolant, lubricating oil and fuel are enough before starting the engine. It is not allowed to start the engine with lack of diesel fuel in the fuel tank. The fuel tank should be replenished; or it will cause damage to the high pressure fuel pump.

Observe the engine operation and all the instrument readings. In case of critical situation, an emergency stop should be performed to prevent the seizure of moving pads caused by low oil pressure or overheating due to lack of coolant.

Do not run the engine at high load and high speed when the coolant temperature is blow 60°C.

The belt tension and the other drive devices can only be inspected when the engine is in stop.

Malfunction thermostat should be replaced in time but the use of thermostat cannot be omitted.


Do not remove the lead seals on the engine to make adjustment without permission. If necessary send the relevant components to a professional service location for repair and adjustment.

Comments

Popular posts from this blog

What Is the Difference Between Electric Motor and Electric Generator

An electric motor is an electrical machine that converts electrical energy into mechanical energy. Most electric motors operate through the interaction between the motor's magnetic field and winding currents to generate force. In certain applications, such as in regenerative braking with traction motors, electric motors can be used in reverse as generators to recover energy that might otherwise be lost as heat and friction. An electric generator operates in the reverse direction, converting mechanical energy into electrical energy. Electric generator can be divided into various type, open type, silent type, trailer type, portable type and container type, etc. Electric generator is mainly composed of diesel engine & alternator. Electric generator set is mainly composed of engine, alternator, control module, and common base. Electric generator :- Electric generator is a type of machine which converts mechanical input (energy) into electrical output (...

Engine Fault Code Messages - Volvo Penta Engine

Volvo Penta Engine Fault Code When a malfunction has occurred and the diagnostic system has generated one or more fault codes, these are read out differently depending on the equipment used. Please refer to “Fault code messages”. If the system indicates that a fault code has been set: 1 Cut engine speed to idle, or shut the Volvo engine off. 2 For DCU/DU Read the fault code from the display, please refer to Reading fault codes via the DCU or Reading fault codes via the DU. For CIU press the diagnostic button and read the fault code, by observing the flashing of the diagnostic lamp. Refer to Reading fault codes via the diagnostic lamp, CIU. 3 Look up the fault code in the Fault Code Register chapter and take the recommended measures. Reading fault codes via the DU (Display Unit) Depending on the severity of the fault the text, either WARNING! or ALARM STOP (a buzzer sounds) will be shown on the display 1 Press any button to come to the fault list. The f...

Yuchai 4D24 & 4D24T Series Diesel Engine Operation Guide

Yuchai 4D24 & 4D24T series off-highway diesel engines are developed by RAYWIN POWERTRAIN TECHNOLOGY CO., LTD. with international engine R&D institutions together. Adopted tunnel block, rotary fuel pump (mechanic or electric governor), turbocharged/naturally aspirated and 2-valve technologies, 4D24 series engines are with reliable, fuel-efficient and strong power characters. It could be applied for agriculture & garden fields, construction equipment, power generation , marine and industrial equipment. General Safety Rules Incorrect procedures, carelessness or neglect of warning instructions may cause burns, cuts, body mutilation, asphyxiation or other injury or even death. Before maintenance, please read and understand all the security measures instructions and warnings carefully. The following pages contain a general security measures to ensure personal safety that you should follow. ◆ Maintenance area should be dry, bright and well ventilation, no sund...